5406554-2 1x6 Multi-Port RJ45 Female Stock Connector

Categories	Connectors, Interconnects
	Modular Connectors - Jacks
Application-LAN	ETHERNET(NoN POE)
Connector Type	RJ45
Number of Positions/Contacts	8p8c
Number of Ports	1x6
Applications Speed	RJ45 Without Magnetics
Mounting Type	Through Hole
Orientation	90° Angle (Right)
Termination	Solder
Height Above Board	13.40 mm
LED Color	With LED
Shielding	Shielded, EMI Finger
Features	Board Guide
Tab Direction	UP
Contact Material	Phosphor Bronze
Packaging	Tray
Operating Temperature	-40°C ~ 85°C
Contact Material Plating Thickness	Gold 6.00µin/15.00µin/30.00µin/50.00µin
Shield Material	Brass
Housing Material	Thermoplastic
RoHS Compliant	YES-RoHS-5 WIth Lead in Solder Exemption

  The difference between RJ and RJ11 Different standards, different sizes. Due to the different sizes of the two (RJ11 is 4 or 6-pin, RJ is an 8-pin connection device), obviously the RJ plug cannot be inserted into the RJ11 jack. The reverse is physically feasible (the RJ11 plug is smaller than the RJ jack), which makes people mistakenly believe that the two should or can work together. This is not the case. It is strongly recommended not to use RJ11 plugs for RJ jacks. Because RJ11 is not internationally standardized, its size, insertion force, insertion angle, etc. do not conform to the international standard connector design requirements, so interoperability cannot be guaranteed. They even cause the destruction of both. Since the RJ11 plug is smaller than the RJ jack, the plastic parts on both sides of the plug will damage the metal pins of the inserted jack.